In the family of German standard mold steels, 1.2311 is the quiet workhorse. It's the same grade as P20—a pre-hardened plastic mold steel supplied at 28-32 HRC, with good machinability, adequate polishability, and transparent pricing. It's everywhere: mold bases, cores, cavities. But many mold shops have a habit: when they hit a large mold, a deep cavity, or a mirror-finish job, they grab 1.2311 anyway. The result is either insufficient core hardness causing deformation, or polishing that can't reach the customer's spec—leading to rework, material change, and lost time and money.

The problem isn't 1.2311 itself. It's not knowing its capability boundary. Today we talk about how 1.2311 should be used, and when to switch to 1.2738 without hesitation.

1. Machining: Pre-Hardened, But Don't Use Soft Steel Parameters
1.2311 comes pre-hardened at 28-32 HRC. It can be milled, drilled, and tapped directly, skipping heat treatment—its biggest convenience. But it's not soft steel. Many use 45# steel parameters, aggressive feed rates, and end up with rapid tool wear and a work-hardened surface layer that makes polishing a nightmare.
The sensible approach: carbide-coated tools, cutting speed 120-180 m/min, moderate feed, ample coolant. Especially in finishing, don't increase depth of cut to save time—leave uniform allowance for polishing. 1.2311's cutting force is lower than H13, and chip evacuation is smooth, making it suitable for automated machining—provided the parameters are right.
2. Polishing and Texturing: Adequate, But Not Top-Tier
1.2311's polishability is upper-mid among pre-hardened steels, typically achieving Ra 0.4-0.6μm—enough for most appliance housings, daily goods, and general appearance parts. But if your customer wants Class-A mirror finish or direct high-gloss molding, 1.2311 struggles. That's when you consider 1.2738 or stainless mold steel.
For texturing, 1.2311 performs stably and is a common choice for textured molds. But note: welded zones texture unevenly. The hardness differs from the base material, causing depth variation and patch marks. Complete all welding and repairs before texturing.
| Comparison Items | 1.2311 Mold Steel | 1.2738 Mold Steel |
| Hardness (Delivery) | 28-32 HRC | 30-38 HRC |
| Max Applicable Section | ~400 × 300 mm | ~600 × 500 mm |
| Core Uniformity | Moderate, soft core risk | Good, ≤2 HRC difference |
| Polishability | Ra 0.4-0.6μm | Ra 0.2-0.3μm |
| Wear Resistance | Fair | Good |
| Cost | Lower | 25%-35% higher |
| Main Use | General injection molds, mold bases, moderate appearance parts | Large molds, Class-A surfaces, glass-filled engineering plastics |
As shown above, 1.2311 and 1.2738 share the same pre-hardened family but differ sharply in capability boundaries. 1.2311 wins on cost and thermal conductivity—ideal for high-volume general-purpose molds. 1.2738 wins on hardenability, polishability, and wear resistance—the safer choice for large, precise, or long-life molds. The decision comes down to your mold size, surface requirement, and resin type. Match the steel to the job, not the other way around.
3. Know When to Upgrade to 1.2738
This is what 1.2311 users most need to understand. Both are pre-hardened plastic mold steels, but 1.2738 contains about 1% nickel, offering better hardenability, more uniform core hardness in large sections, higher polishability, and better wear resistance.
Simply put, consider switching from 1.2311 to 1.2738 in three situations:
(1) Large mold sections: 1.2311's applicable section is about 400 mm × 300 mm. Beyond that, core hardness drops noticeably, creating a soft core. 1.2738 handles up to 600 mm × 500 mm while maintaining core hardness above 30 HRC.
(2) Mirror or high-gloss requirements: 1.2311 tops out at Ra 0.4-0.6μm. 1.2738 reaches Ra 0.2μm, suitable for Class-A surfaces and optical parts.
(3) Glass-filled resins or long life: 1.2738's wear resistance outperforms 1.2311, with significantly longer life when molding hard fillers like PA66+30%GF.
Of course, 1.2738 costs 25%-35% more and machines slightly slower. So for small-to-medium molds, general appearance parts, and low-volume production, 1.2311 remains the more economical choice. The key isn't "which is better," but "which fits better."
In one sentence: 1.2311 is the value king among pre-hardened plastic mold steels—but it has boundaries. Keep sections moderate, polishing requirements reasonable, and avoid overly hard resins, and it performs reliably. Cross those boundaries, and it's time for 1.2738.
For more information about our solutions and services, please contact us.
FAQ
Q1: What is the delivered hardness of 1.2311 mold steel?
A: Typically 28-32 HRC. It is a pre-hardened plastic mold steel that can be machined directly without heat treatment. Some select grades reach about 34 HRC.
Q2: Are 1.2311 and P20 the same material?
A: Yes. 1.2311 is the German DIN designation, P20 is the American AISI designation. Both are the same grade of pre-hardened plastic mold steel with essentially corresponding properties and applications.
Q3: Can 1.2311 mold steel be polished to a mirror finish?
A: Generally reaches Ra 0.4-0.6μm, sufficient for most appearance parts, but difficult to consistently achieve Class-A mirror finish. For high-gloss or optical parts, choose 1.2738 or S136.
Q4: How to choose between 1.2311 and 1.2738?
A: For small-to-medium molds, general appearance parts, and low volume, choose 1.2311 for cost-effectiveness. For large-section molds, high-gloss mirrors, glass-filled resins, or long-life requirements, choose 1.2738—25%-35% more expensive, but better life and stability.

